• Torque: 2450 Nm max at 100 bar
• Angle of rotation: 90, 180°, 270° or 360° (others on request)
• Optimized end cushioning (option)
• Through precise combined helical gears and low friction seals, is the E1 already from 10 bar economically applicable
• Maximum operating pressure: 100 bar

Low hydraulic axial load on drive shaft through small differential

• Less load on the ball bearing, freeing it for more important task.
• Extending the service life of the rotary actuator.

Adjustable drive shaft datum

• If you manufacture the hub, it is not necessary to regards the exact position of the keyways.
• The total angle can be re-adjusted at any time.

Ball bearing

• In spite of the possibility is the radial and axial power through the application of ball bearings by low hydraulic pressure warranted.

Highly perfected end cushioning for absorption of kinetic energy

• Negating the needs for expansive proportional or servo controls with virtually identical characteristics.

Large-area press-fit joint

• Assuring positive power/torque transmission even at peak load conditions.

Through shaft

• The axial force required for mounting the shaft on the hub can be exerted at the end of the shaft, preventing destruction of the ball bearing.
• The mounting of components for the pivoting angle monitoring is possible without problems.

Wear-resistant moving parts

• Long service life of the rotary actuator through extended-period nitriding.
• Excellent sliding characteristics of the gears.

Modern sealing technology

• Extended service life of seals.
• Increased safety, also with regards to the environment.
• Suitable for most fluids.
• All installation places have the smallest possible tolerances, in case of that, do we avoid a gap extrusion of the seals.
• No internal leakages through solid seals enabling the load to be held in any intermediate position.